Renault Vel Satis P1130 Engine Error Code
When you check Renault Vel Satis car engine light came on code P1130 the reason should be Engine Light ON (or Service Engine Soon Warning Light). However Renault manufacturer may have a different definition for the P1130 OBD-II Diagnostic Powertrain (P) Trouble Code. So you should chech it on our car models.

On 1999 and later P1130 Renault Vel Satis engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
![]() |
Renault Vel Satis P1130 OBD-II Diagnostic Powertrain (P) Trouble Code DescriptionRenault Vel Satis car P1130 OBD-II Trouble Code Lack Of HO2S Switch Adaptive Fuel At Limit is one of the definitions for the P1130; however your vehicles manufacturer may have a different definition for the P1130 code. Please check below for your sReason For Renault Vel Satis P1130 CodeThe reason of Renault Vel Satis P1130 OBD-II Engine Error Code is P1130 Lack Of HO2S Switch Adaptive Fuel At Limit. |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P1130 Renault Vel Satis code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
Renault Vel Satis P1130 Possible Solution :
In-line Ford engines, along with those of most other manufacturers, begin the numbering of cylinders at the front and proceed in numerical order toward the back. In the V-engine design, Ford follows a similar design with the number one cylinder at the front left of the engine. In the V-6 configuration, cylinder 4 is at the front right of the engine and in a V-8, cylinder number 5 is in that location. Other manufacturers sometimes use an alternating pattern in the V-engines.
What does fault code P1130 mean for Renault Vel Satis ?
|